FANUC Series 16/18/160/180-Model C Connection Manual (Hardware)

C. 20–PIN INTERFACE CONNECTORS AND CABLES
B–62753EN/01
288
Item Unit Specifications
Product No. A66L–0001–0286
Manufacturer HITACHI CABLE, LTD.
OKI ELECTRIC CABLE., LTD.
Rating
80_C, 30V
Material
Conductor,braid–shielded
wire,drain wire
Strand wire of tinned annealed
copper (JIS C3152)
Insulator Heat–resistant flame–retardant vinyl
Sheath Oilproof, heat–resistant, flame–re-
tardant vinyl
Number of wires (wire ons.) Cores 6 (1 to 6) 6 (three pairs)
(7 to 9)
Con-
dt
Size mm
2
0.5 0.18
ductor
Structure Conduc-
tors
/mm
20/0.18 7/0.18
Outside diameter mm 0.94 0.54
Insula-
tor
Standard thickness
(The minimum thickness is
at least 80% of the stan-
dard thickness.)
mm 0.25 0.2
Outside diameter mm 1.50 0.94
Twisted
i
Outside diameter mm 1.88
pair
Direction of lay Left
Pitch mm 20 or less
Lay Twist the wires at an appropriate
pitch so the outermost layer is right–
twisted, and wrap tape around the
outermost layer.
Apply a cable separator as required.
Lay diameter mm 5.7
Drain
i
Size mm
2
0.3
wire
Structure Wires/
mm
12/0.18
Outside diameter mm 0.72
Shield
bid
Element wire diameter mm 0.12
braid
Thickness mm 0.3
Braid density % 70
Outside diameter mm 6.3
Sheath
Color Black
Standard thickness
(The minimum thickness is
at least 85% of the stan-
dard thickness.)
mm 1.1
Outside diameter mm 8.5Max. 9.0(1)
Standard length m 100
Packing method Bundle
Electri-
cal per-
f
Electric resistance
(at 20_C) (wire nos.)
/km 39.4(1 to 6) 113(7 to 9)
f
or-
mance
Insulation resistance
(at 20_C)
M–km 15
Dielectric strength (AC) V/min. 500
Flame resistance Shall pass flame resistance test
VW–1SC of UL standards,
(Note 1) The maximum outside diameter applies to portions other than
the drain wire.
12–core cable
D 

Leave a Reply

Your email address will not be published. Required fields are marked *