FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
8. COORDINATE SYSTEM
B–62754EN/01
90
Setting the coordinate system by the
G50X128.7Z375.1; command (Diameter designation)
Setting the coordinate system by the
G50X1200.0Z700.0; command (Diameter designation)
Base point
Example 1
Example 2
Z
X
375.1
φ128.7
Z
X
700.0
φ1200.0
Zero point
Start point
Start point
(standard point)
Examples

Leave a Reply

Your email address will not be published. Required fields are marked *