FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
13. PROGRAM CONFIGURATION
B–62754EN/01
144
6) Pattern data function
Program numaber
When SPPR = 0 When SPPR = 1
O00009500
O00009501
O00009502
O00009503
O00009504
O00009505
O00009506
O00009507
O00009508
O00009509
O00009510
O90009500
O90009501
O90009502
O90009503
O90009504
O90009505
O90009506
O90009507
O90009508
O90009509
O90009510
External input signals can be used to search for a program number. A
program stored in CNC memory can be selected by externally inputting
a program number, between 1 and 99999999, to the CNC. For details,
refer to the appropriate manual supplied from the machine tool builder.
This function disables subprogram call unless FS15 tape format (see
II–19) is used. This restriction also applies to calling a program in
external I/O devices (M198).
(Example)
M98 P12345678
;
Subprogram number
O8–digit program number can not be used in DNC1, DNC2, ethernet,
data server, and MMC–IV.
D External program
number search
Limitations
D Subprogram call
D DNC

Leave a Reply

Your email address will not be published. Required fields are marked *