FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
14. FUNCTIONS TO SIMPLIFY
PROGRAMMING
B–62754EN/01
182
G80 cancels canned cycle.
G80 ;
Canned cycle for drilling is canceled to perform normal operation.
Point R and point Z are cleared. Other drilling data is also canceled
(cleared).
M51 ; Setting C–axis index mode ON
M3 S2000 ; Rotating the drill
G00 X50.0 C0.0 ; Positioning the drill along the X– and C–axes.
G83 Z–40.0 R–5.0 P500 F5.0 M31 ; Drilling hole 1
C90.0 M31 ; Drilling hole 2
C180.0 M31 ; Drilling hole 3
C270.0 M31 ; Drilling hole 4
G80 M05 ; Canceling the drilling cycle and stopping drill rotation
M50 ; Setting C–axis index mode off
14.3.4
Canned Cycle for
Drilling Cancel (G80)
Format
Explanations
Examples

Leave a Reply

Your email address will not be published. Required fields are marked *