FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
14. FUNCTIONS TO SIMPLIFY
PROGRAMMING
B–62754EN/01
186
(B)
(1)
(2) (K)
(3)
(4) (K)
X
Z
U (dwell)
A
U (dwell)
G73 A_ (B_) W_ U_ K_ H_ ;
A : Depth of cut
B : Depth of cut
W : Grinding range
U : Dwell time
K : Feedrate
H : Number of repetitions Setting value : 1A9999
W
A, B, and W are to be specified in an incremental mode.
In the case of a single block, the operations 1, 2, 3, and 4 are performed
with one cycle start operation.
The specification of B is valid only for a specified block. This is not
associated with B of the G71 or G72 cycle.
14.4.3
Oscillation Grinding
Cycle (G73)
Format
Explanations

Leave a Reply

Your email address will not be published. Required fields are marked *