FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
B–62754EN/01
21. TWO–PATH CONTROL
FUNCTION
375
#7 #6 #5 #4 #3 #2 #1 #0
TY1 TY08140
TY0, TY1:Set the relationship between the coordinate systems of the
two tool posts, with tool post 1 used as the reference.
(1) When TY1=0 and TY0=0
Z
Tool post 1
Tool post 2
(2) When TY1=0 and TY0=1
X
X
ZZ
X
(3) When TY1=1and TY0=0
X
Z
X
Z
(4) When TY1=1 and TY0=1
Z
X
Z
X
Tool post 2 Tool post 1
Tool post 1
Tool post 1
Tool post 2
Tool post 2
D Set the relationship
between the coordinate
systems of the two tool
posts in parameter
No.8140

Leave a Reply

Your email address will not be published. Required fields are marked *