FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
1. GENERAL
B–62754EN/01
20
Methods of command for moving the tool can be indicated by absolute
or incremental designation (See II–9.1).
The tool moves to a point at “the distance from zero point of the
coordinate system” that is to the position of the coordinate values.
Tool
Command specifying movement from point A to point B
Coordinates of point B
G90X30.0Z70.0;
φ30
A
B
Z
X
70
110
Workpiece
Fig. 1.3.3 (a) Absolute command
1.3.3
How to Indicate
Command Dimensions
for Moving the Tool –
Absolute, Incremental
Commands
Explanations
D Absolute command

Leave a Reply

Your email address will not be published. Required fields are marked *