FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
22. PATTERN DATA INPUT
FUNCTION
B–62754EN/01
392
Pressing the
OFFSET
SETTING
key and [MENU] is displayed on the following
pattern menu screen.
1. TAPPING
2. DRILLING
3. BORING
4. POCKET
5. BOLT HOLE
6. LINE ANGLE
7. GRID
8. PECK
9. TEST PATRN
10. BACK
MENU : HOLE PATTERN O0000 N00000
> _
MDI **** *** *** 16:05:59
[ MACRO ] [ MENU ] [ OPR ] [ ] [(OPRT)]
HOLE PATTERN :
This is the menu title. An arbitrary character string consisting of up
to 12 characters can be specified.
BOLT HOLE :
This is the pattern name. An arbitrary character string consisting of
up to 10 characters can be specified, including katakana.
The machine tool builder should specify the character strings for the menu
title and pattern name using the custom macro, and load the character
strings into program memory as a subprogram of program No. 9500.
22.1
DISPLAYING THE
PATTERN MENU

Leave a Reply

Your email address will not be published. Required fields are marked *