FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
22. PATTERN DATA INPUT
FUNCTION
B–62754EN/01
396
When a pattern menu is selected, the necessary pattern data is displayed.
NO. NAME DATA COMMENT
500 TOOL 0.000
501 STANDARD X 0.000 *BOLT HOLE
502 STANDARD Y 0.000 CIRCLE*
503 RADIUS 0.000 SET PATTERN
504 S. ANGL 0.000 DATA TO VAR.
505 HOLES NO 0.000 NO.500–505.
506 0.000
507 0.000
ACTUAL POSITION (RELATIVE)
X 0.000 Y 0.000
Z 0.000
VAR. : BOLT HOLE O0001 N00000
> _
MDI **** *** *** 16:05:59
[ MACRO ] [ MENU ] [ OPR ] [ ] [(OPRT)]
BOLT HOLE :
This is the pattern data title. A character string consisting of up to 12
characters can be set.
TOOL :
This is the variable name. A character string consisting of up to 10
characters can be set.
*
BOLT HOLE CIRCLE* :
This is a comment statement. A character string can be displayed
consisting of up to 8 lines, 12 characters per line.
(It is permissible to use katakana
in a character string or line.)
The machine tool builder should program the character strings of pattern
data title, pattern name, and variable name using the custom macro, and
load them into the program memory as a subprogram whose No. is 9500
plus the pattern No. (O9501 to O9510).
22.2
PATTERN DATA
DISPLAY

Leave a Reply

Your email address will not be published. Required fields are marked *