FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
1. GENERAL
B–62754EN/01
22
2. Radius programming
In radius programming, specify the distance from the center of the
workpiece, i.e. the radius value as the value of the X axis.
A(15.0, 80.0), B(20.0, 60.0)
Coordinate values of points A and B
Z
X
60
80
A
B
20
15
Workpiece
Fig. 1.3.3 (d) Radius programming

Leave a Reply

Your email address will not be published. Required fields are marked *