FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
1. GENERAL
B–62754EN/01
418
The current position of the tool is displayed with the coordinate values.
The distance from the current position to the target position can also be
displayed. (See Section III–11.1 to 11.1.3)
X
x
Workpiece coordinate system
Z
z
MEM STRT MTN *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION(ABSOLUTE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
X 123.456
Z 456.789
When a trouble occurs during operation, error code and alarm message are
displayed on CRT screen. See APPENDIX G for the list of error codes and
their meanings.
(See Section III–7.1)
ALARM MESSAGE
MEM STOP
* * * * * * *
19 : 55 : 22
O1000
N00003
>_
ALM
ALARM
MSG
HISTRY
010 IMPROPER G-CODE
1.7.2
Current Position
Display
1.7.3
Alarm Display

Leave a Reply

Your email address will not be published. Required fields are marked *