FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
2. OPERATIONAL DEVICES
B–62754EN/01
442
To display a more detailed screen, press a function key followed by a soft
key. Soft keys are also used for actual operations.
The following illustrates how soft key displays are changed by pressing
each function key.
: Indicates a screen that can be displayed by pressing a
function key(*1)
: Indicates a soft key(*2)
: Indicates input from the MDI panel.
: Indicates a soft key displayed in green (or highlighted).
: Indicates the continuous menu key (rightmost soft key)(*3).
[]
()
[
]
The symbols in the following figures mean as shown below :
: Indicates screens
*1 Press function keys to switch between screens that are used frequently.
*2 Some soft keys are not displayed depending on the option
configuration.
*3 In some cases, the continuous menu key is omitted when the 14 CRT
display or 9.5 LCD is used.
2.3.3
 

Leave a Reply

Your email address will not be published. Required fields are marked *