FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
2. OPERATIONAL DEVICES
B–62754EN/01
460
There are 12 soft keys in the 14 CRT/MDI or 9.5 LCD/MDI panel. As
illustrated below, the 5 soft keys on the right and those on the right and
left edges operate in the same way as the 9 CRT, whereas the 5 keys on
the left hand side are expansion keys dedicated to the 14 CRT or 9.5
LCD.
9 CRT soft key
14 CRT/9.5 LCD dedicated expansion soft keys
Fig. 2.3.6 CRT and LCD soft key configuration
14 CRT / 9.5 LCD soft key
Whenever a position display appears in the left half of the screen after a
function key other than
POS
is pressed, the soft keys on the left half of
the soft key display area are displayed as follows:
ABS
REL ALL
HNDL
The soft key corresponding to the position display is indicated in reverse
video.
2.3.6
14 CRT and 9.5 LCD
Soft Key Configuration

Leave a Reply

Your email address will not be published. Required fields are marked *