FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
2. OPERATIONAL DEVICES
461
Five types of external input/output devices are available. This section
outlines each device. For details on these devices, refer to the
corresponding manuals listed below.
Table 2.4 External I/O device
Device name Usage Max.
storage
capacity
Reference
manual
FANUC Handy File Easy–to–use, multi function
input/output device. It is de-
signed for FA equipment and
uses floppy disks.
3600m B–61834E
FANUC Floppy Cas-
sette
Input/output device. Uses
floppy disks.
2500m B–66040E
FANUC FA Card Compact input/output device.
Uses FA cards.
160m B–61274E
FANUC PPR Input/output device consist-
ing of a paper tape reader,
tape punch, and printer.
275m B–58584E
Portable Tape Reader Input device for reading pa-
per tape.
______ Appendix
H
The following data can be input/output to or from external input/output
devices:
1. Programs
2. Offset data
3. Parameters
4. Custom macro common variables
5. Pitch error compensation data
For how data is input and output, see Chapter III–8.
2.4
EXTERNAL I/O
DEVICES

Leave a Reply

Your email address will not be published. Required fields are marked *