FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
2. OPERATIONAL DEVICES
467
If a hardware failure or installation error occurs, the system displays one
of the following three types of screens then stops.
Information such as the type of printed circuit board installed in each slot
is indicated. This information and the LED states are useful for failure
recovery.
SLOT CONFIGURATION DISPLAY
0 : 003E4000
1 : 30464202
2 : 00504303
3 :
4 :
5 :
0 :
1 :
2 :
3 :
4 :
5 :
Physical slot number
(secondary)
Information such as the module ID of an installed printed circuit board
Physical slot number
(primary)
Internally–assigned slot number
Module function
Types of printed circuit boards
Software ID
3E : Main CPU
3F : Remote buffer
41 : PMC–RC
45 : Graphics
46 :
50 : SUB CPU
53 : C.A.P.II
Module ID
40 : CNC
41 : PMC
42 :
43 : SUB
45 : Graphics (C.A.P.I)
46 : Graphics (C.A.P.II)
49 : C.A.P.II
4A : Remote buffer
4F : PMC–RC
2.5.2
Screen Displayed at
Power–on
Slot status display

Leave a Reply

Your email address will not be published. Required fields are marked *