FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
4. AUTOMATIC OPERATION
495
When the custom macro option is provided, macro programs can also be
created, called, and executed in the
MDI mode. However, macro call
commands cannot be executed when the mode is changed to
MDI mode
after memory operation is stopped during execution of a subprogram.
When a program is created in the
MDI mode, an empty area in program
memory is used. If program memory is full, no programs can be created
in the
MDI mode.
D Macro call
D Memory area

Leave a Reply

Your email address will not be published. Required fields are marked *