FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

PROGRAMMING
2. CONTROLLED AXES
B–62754EN/01
32
Item
16–TC
160–TC
16–TC, 160–TC
(two–path control)
Number of basic
controlled axes
2 axes 2 axes for each tool post
(4 axes in total)
Controlled axis expansion
(total)
Max. 8 axes
(Included in Cs axis)
Max. 6 axes for each tool
post +Cs axis (Note)
Number of basic simulta-
neously controlled axes
2 axes 2 axes for each tool post
(4 axes in total)
Simultaneously controlled
axis expansion (total)
Max. 6 axes Max. 4 axes for each tool
post
NOTE
1 A two–path control system with a 9–inch CRT has up to
eight controlled axes.
2 The number of simultaneously controllable axes for manual
operation (jog feed, incremental feed, or manual handle
feed) is 1 or 3 (1 when bit 0 (JAX) of parameter 1002 is set
to 0 and 3 when it is set to 1).
Item
18–TC
180–TC
18–TC, 180–TC
(two–path control)
Number of basic
controlled axes
2 axes 2 axes for each tool post
(4 axes in total)
Controlled axis expansion
(total)
Max. 6 axes
(Included in Cs axis)
Max. 4 axes for each tool
post +Cs axis (Note)
Number of basic simulta-
neously controlled axes
2 axes 2 axes for each tool post
(4 axes in total)
Simultaneously controlled
axis expansion (total)
Max. 4 axes Max. 4 axes for each tool
post
NOTE
1 A two–path control system with a 9–inch CRT has up to
eight controlled axes.
2 The number of simultaneously controllable axes for manual
operation (jog feed, incremental feed, or manual handle
feed) is 1 or 3 (1 when bit 0 (JAX) of parameter 1002 is set
to 0 and 3 when it is set to 1).
2.1
CONTROLLED AXES
Series 16
Series 160
Series 18
Series 180

Leave a Reply

Your email address will not be published. Required fields are marked *