FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
4. AUTOMATIC OPERATION
B–62754EN/01
504
The schedule function allows the operator to select files (programs)
registered on a floppy–disk in an external input/output device (Handy
File, Floppy Cassette, or FA Card) and specify the execution order and
number of repetitions (scheduling) for performing automatic operation.
It is also possible to select only one file from the files in the external
input/output device and execute it during automatic operation.
FILE DIRECTORY
FILE NO. FILE NAME
0001 O0010
0002 O0020
0003 O0030
0004 O0040
Set file number and
number of repetitions.
ORDER FILE NO REPETITION
01 0002 2
02 0003 1
03 0004 3
04 0001 2
Scheduling screen
Executing automatic operation
List of files in an external input/output device
Procedure for Scheduling Function
1 Press the MEMORY switch on the machine operators panel, then
press the
PROG
function key on the MDI panel.
2 Press the rightmost soft key (continuous menu key), then press the
[FL. SDL] soft key. A list of files registered in the Floppy Cassette is
displayed on screen No. 1. To display more files that are not
displayed on this screen, press the page key on the MDI panel. Files
registered in the Floppy Cassette can also be displayed successively.
4.4
SCHEDULING
FUNCTION
Procedure for executing
one file

Leave a Reply

Your email address will not be published. Required fields are marked *