FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
4. AUTOMATIC OPERATION
505
FILE DIRECTORY O0001 N00000
MEM
**** *** ***
19 : 14 : 47
PRGRM
(OPRT)
CURRENT SELECTED : SCHEDULE
NO. FILE NAME (METER) VOL
0000 SCHEDULE
0001 PARAMETER 58.5
0002 ALL PROGRAM 11.0
0003 O0001 1.9
0004 O0002 1.9
0005 O0010 1.9
0006 O0020 1.9
0007 O0040 1.9
0008 O0050 1.9
SCHDUL
Screen No.1
DIR
3 Press the [(OPRT)] and [SELECT] soft keys to display “SELECT
FILE NO.” (on screen No. 2). Enter a file number, then press the
[F
SET]
and [EXEC] soft keys. The file for the entered file number is
selected, and the file name is indicated after “
CURRENT
SELECTED:
”.
O0001 N00000
MEM
**** *** ***
19 : 17 : 10
FILE DIRECTORY
CURRENT SELECTED:O0040
NO. FILE NAME (METER) VOL
0000 SCHEDULE
0001 PARAMETER 58.5
0002 ALL PROGRAM 11.0
0003 O0001 1.9
0004 O0002 1.9
0005 O0010 1.9
0006 O0020 1.9
0007 O0040 1.9
0008 O0050 1.9
SELECT FILE NO.=7
F SET
EXEC
Screen No.2
>_
4 Press the REMOTE switch on the machine operators panel to enter
the
RMT mode, then press the cycle start switch. The selected file is
executed. For details on the
REMOTE switch, refer to the manual
supplied by the machine tool builder. The selected file number is
indicated at the upper right corner of the screen as an F number
(instead of an O number).

Leave a Reply

Your email address will not be published. Required fields are marked *