FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
4. AUTOMATIC OPERATION
B–62754EN/01
506
F0007 N00000
RMT
**** *** ***
13 : 27 : 54
FILE DIRECTORY
CURRENT SELECTED:O0040
PRGRM
(OPRT)
SCHDUL
Screen No.3
DIR
1 Display the list of files registered in the Floppy Cassette. The display
procedure is the same as in steps 1 and 2 for executing one file.
2 On screen No. 2, press the
[(OPRT)] and [SELECT] soft keys to
display “
SELECT FILE NO.
3 Enter file number 0, and press the
[F SET], and [EXEC] soft keys.
SCHEDULE” is indicated after “CURRENT SELECTED:”.
4 Press the left most soft key (return menu key) and the
[SCHDUL] soft
key. Screen No. 4 appears.
F0000 N02000
MEM
**** *** ***
22 : 07 : 00
FILE DIRECTORY
ORDER FILE NO. REQ.REP CUR.REP
01
02
03
04
05
06
07
08
09
10
>_
PRGRM
DIR
Screen No.4
SCHDUL
(OPRT)
Move the cursor and enter the file numbers and number of repetitions
in the order in which to execute the files. At this time, the current
number of repetitions “CUR.REP” is 0.
5 Press the
REMOTE switch on the machine operators panel to enter
the
RMT mode, then press the start switch. The files are executed in
the specified order. When a file is being executed, the cursor is
positioned at the number of that file.
The current number of repetitions
CUR.REP is increased when M02
or M30 is executed in the program being run.
D Procedure for executing
the scheduling function

Leave a Reply

Your email address will not be published. Required fields are marked *