FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
4. AUTOMATIC OPERATION
515
3 Enter an automatic operation mode (memory mode or MDI mode),
then press the cycle start button to start automatic operation.
D The mirror image function can also be turned on and off by setting bit
0 (MIRx) of parameter (No.0012) to 1 or 0.
D For the mirror image switches, refer to the manual supplied by the
machine tool builder.
The direction of movement during manual operation, the direction of
movement from an intermediate point to the reference position during
automatic reference position return (G28).
Explanations
Restrictions

Leave a Reply

Your email address will not be published. Required fields are marked *