FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
4. AUTOMATIC OPERATION
517
N1
N2
N1 Point A
N2
N1 Point A
N2
Point B
N1 Point A
N2
Point B
1. The N1 block cuts a workpiece
Tool
Block start point
2. The tool is stopped by pressing the feed hold switch in
the middle of the N1 block (point A).
3. After retracting the tool manually to point B, tool movement is restarted.
4. After automatic return to point A at the dry run feedrate, the remaining
move command of the N1 block is executed.
Manual
intervention
WARNING
When performing manual intervention, pay particular
attention of machining and the shape of the workpiece so
that the machine and tool are not damaged.
Example

Leave a Reply

Your email address will not be published. Required fields are marked *