FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

6. SAFETY FUNCTIONS
B–62754EN/01
OPERATION
532
If you press Emergency Stop button on the machine operator’s panel, the
machine movement stops in a moment.
EMERGENCY STOP
Red
Fig. 6.1 Emergency stop
This button is locked when it is pressed. Although it varies with the
machine tool builder, the button can usually be unlocked by twisting it.
EMERGENCY STOP interrupts the current to the motor.
Causes of trouble must be removed before the button is released.
6.1
EMERGENCY STOP
Explanation

Leave a Reply

Your email address will not be published. Required fields are marked *