9. EDITING PROGRAMS
A new program can be created by copying a program.
Fig. 9.6.1 Copying an Entire Program
In Fig. 9.6.1, the program with program number xxxx is copied to a newly
created program with program number yyyy. The program created by
copy operation is the same as the original program except the program
Procedure of copying an entire program
1 Enter the EDIT mode.
2 Press function key
3 Press soft key
4 Press the continuous menu key.
5 Press soft key
6 Check that the screen for the program to be copied is selected and
press soft key
7 Press soft key
8 Enter the number of the new program (with only numeric keys ) and
9 Press soft key
Copying an Entire