FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
10. CREATING PROGRAMS
B–62754EN/01
620
When no keys are pressed, the standard details screen is displayed.
**** *** ***
O0010 N00000
PROGRAM
GGGG
XU
ZW
AC
FH
IK
PQ
RM
ST
:
EDIT 14 : 41 : 10
(OPRT)
PRGRM
G.MENU
BLOCK
7 Move the cursor to the block to be modified on the program screen.
At this time, a data address with the cursor blinks.
8 Enter numeric data by pressing the numeric keys and press the
[INPUT] soft key or
INPUT
key. This completes the input of one data
item.
9 Repeat this operation until all data required for the entered G code is
entered.
10 Press the
INSERT
key. This completes the registration of data of one
block in program memory. On the screen, the G code menu screen is
displayed, allowing the user to enter data for another block. Repeat
the procedure starting with 5 as required.
11 After registering all programs, press the
[PRGRM] soft key. The
registered programs are converted to the conversational format and
displayed.
12 Press the
RESET
key to return to the program head.

Leave a Reply

Your email address will not be published. Required fields are marked *