FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
11. SETTING AND DISPLAYING DATA
631
Displays the current position of the tool in the workpiece coordinate
system. The current position changes as the tool moves. The least input
increment is used as the unit for numeric values. The title at the top of
the screen indicates that absolute coordinates are used.
Display procedure for the current position screen in the workpiece coordinate system
1 Press function key
POS
.
2 Press soft key
[ABS].
3 On a 9 CRT, press the
[ABS] soft key one more time to display the
coordinates along axes other than the six standard axes.
MEM STRT MTN *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION(ABSOLUTE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
X 123.456
Z 456.789
D Display with one–path control
MEM STRT MTN *** 09:06:35 HEAD1
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION(ABSOLUTE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
X
1
123.456
Z
1
456.789
X
2
123.456
Z
2
456.789
D Display with two–path control
(9CRT/PDP, 8.4 LCD)
11.1.1
Position Display in the
Workpiece Coordinate
System

Leave a Reply

Your email address will not be published. Required fields are marked *