FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
11. SETTING AND DISPLAYING DATA
633
Displays the current position of the tool in a relative coordinate system
based on the coordinates set by the operator. The current position changes
as the tool moves. The increment system is used as the unit for numeric
values. The title at the top of the screen indicates that relative coordinates
are used.
Display procedure for the current position screen with the relative coordinate system
1 Press function key
POS
.
2 Press soft key
[REL].
3 On a 9 CRT, press the
[REL] soft key one more time to display the
coordinates along axes other than the six standard axes.
MEM STRT MTN *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [ (OPRT) ]
ACTUAL POSITION(RELATIVE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
U 123.456
W 456.789
D Display with one–path control
MEM STRT MTN *** 09:06:35 HEAD1
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [ (OPRT) ]
ACTUAL POSITION(RELATIVE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
U
1
100.000
W
1
200.000
U
2
300.000
W
2
400.000
D Display with two–path control
(9CRT/PDP, 8.4 LCD)
11.1.2
Position Display in the
Relative Coordinate
System

Leave a Reply

Your email address will not be published. Required fields are marked *