FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62754EN/01
636
Displays the following positions on a screen : Current positions of the
tool in the workpiece coordinate system, relative coordinate system, and
machine coordinate system, and the remaining distance. The relative
coordinates can also be set on this screen. See subsection III–11.1.2 for
the procedure.
Procedure for displaying overall position display screen
1 Press function key
POS
.
2 Press soft key
[ALL].
(RELATIVE)
U 246.912
W 913.780
(ABSOLUTE)
X 123.456
Z 456.890
(MACHINE)
X 0.000
Z 0.000
(DISTANCE TO
GO)
X 0.000
Z 0.000
MEM **** *** *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
D Display with one–path control
(9 CRT/PDP, 8.4 LCD)
(RELATIVE)
U1 100.000
W1 200.000
U2 300.000
W2 400.000
(ABSOLUTE)
X1 100.000
Z1 200.000
X2 300.000
Z2 400.000
(MACHINE)
X1 100.000
Z1 200.000
X2 300.000
Z2 400.000
(DISTANCE TO GO)
X1 000.000
Z1 000.000
X2 000.000
Z2 000.000
MEM **** *** *** 09:06:35 HEAD1
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [(OPRT)]
ACTUAL POSITION O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
D Display with two–path control
(9CRT/PDP, 8.4 LCD)
11.1.3
Overall Position
Display

Leave a Reply

Your email address will not be published. Required fields are marked *