FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62754EN/01
648
ACTUAL POSITION
(ABSOLUTE)
X 0.000
Z 30.000
G00 G40 G54 F 500 M 3
G17 G43 G64
G90 G80 G69 H 5
G22 G90 G15 D T 9
G94 G50 G25
G21 G67 S 6000
SACT 0
O3001 N00000
F 0
ABS
REL ALL
PRGRM
NEXT (OPRT)
PROGRAM
O3001 ;
G40 ;
G49 M06 T9 ;
G0 G54 G90 X0 Z0 ;
G43 Z30. H5 S6000 M3 ;
M0 ;
X17.5 Z–22 ;
Z–6.5 ;
G10 P11 R0.995 F500 ;
M30 ;
%
>_
MEM **** *** *** 07:07:40
+
(MODAL)
MM/MIN
Displays the block currently being executed and the block to be executed
next in the MEMORY or MDI mode.
Procedure for displaying the next block display screen
1 Press function key
PROG
.
2 Press chapter selection soft key
[NEXT].
The block currently being executed and the block to be executed next
are displayed.
The screen displays up to 11 G codes specified in the current block
and up to 11 G codes specified in the next block.
G01 X 17.500 G39 I –17.500
G17 F 2000 G42
G41 H 2
G80
(CURRNT) (NEXT)
> _ S 0 T0000
MEM STRT *** 16:05:59
[ PRGRM ][ CHECK ][ CURRNT ][ NEXT ][ (OPRT) ]
PROGRAM O2000 N00130
11.2.3
Next Block Display
Screen

Leave a Reply

Your email address will not be published. Required fields are marked *