FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
11. SETTING AND DISPLAYING DATA
651
The program check screen is not provided for 14–inch CRTs with
one–path control. Press soft key
[PRGRM] to display the contents of the
program on the right half of the screen. The block currently being
executed is indicated by the cursor. The current position of the tool and
modal data are displayed on the left half of the screen.
Up to 18 modal G codes are displayed.
ACTUAL POSITION
(ABSOLUTE)
X 0.000
Z 30.000
G00 G40 G54 F 500 M 3
G17 G43 G64
G90 G80 G69 H 5
G22 G90 G15 D T 9
G94 G50 G25
G21 G67 S 6000
SACT 0
O3001 N00000
F 0
ABS
REL ALL
PRGRM
NEXT (OPRT)
PROGRAM
O3001 ;
G40 ;
G49 M06 T9 ;
G0 G54 G90 X0 Z0 ;
G43 Z30. H5 S6000 M3 ;
M0 ;
X17.5 Y–22 ;
Z–6.5 ;
G10 P11 R0.995 F500 ;
M30 ;
%
>_
MEM **** *** ***
07:07:40
+
(MODAL)
MM/MIN
D 14 inch CRT with
one–path control

Leave a Reply

Your email address will not be published. Required fields are marked *