FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
11. SETTING AND DISPLAYING DATA
661
Displaying the B–axis operation state
1 Press the
PROG
function key.
2 Press the
[CHECK] chapter selection soft key.
3 Press the
[B–DSP] chapter selection soft key. Then, the B–axis
operation state is displayed on the program check screen. The
command currently being executed and the next command are
displayed.
M102 ;
G00 X10. Z20. ;
G01 X20. Z30. F1000 ;
G04 P1000 ;
(ABSOLUTE) (B–AXIS) G00 G95 G22
X 40.000 G01(CURR) G97 G21 G80
Z 40.000 B –200.000G90 G40 G50
Y 0.000 F 0.1500 G69 G25 G67
B –125.994 G00(NEXT)
B 250.000 M 102
T
F 0.1000 S
ACT.F 0 SCAT 0S 0 T0000
PROGRAM CHECK O0001 N00001
MEM STRT *** FIN 21:20:05
[ ABS ][ REL ][ B.DSP ][ ][ (OPRT) ]
11.2.7
Displaying the B–axis
Operation State

Leave a Reply

Your email address will not be published. Required fields are marked *