FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62754EN/01
668
>_
EDIT STRT MIN FIN ALM 17:25:01 HEAD1
[ ][ ][ ][ ][ ][ ] [PRGRM][ LIB ][ ][ ][(OPR)][ ]
PROGRAM O1234 N00010
O1234 ;
N10 G00 ;
N20 X100.0 ;
N30 X200.0 ;
N40 X300.0 Z300.0 ;
N50 X400.0 ;
N60 X500.0 ;
N70 M02 ;
%
Individual screen (14 type screen on the 14CRT)
EDIT STRT MIN FIN ALM 17:25:01 HEAD1
[ ][ABS][REL][ALL][ ][ ][PRGRM][ LIB ][ ][ ][(OPR)][ ]
ACTUAL POSITION O1234N00010
F 1000
MM/M
Individual screen (9 type screen on the 14CRT)
(ABSOLUTE)
X 0.000
Y 0.000
Z 0.000
A 0.000
B 0.000
(RELATIVE)
X 0.000
Y 0.000
Z 0.000
A 0.000
B 0.000
(MACHINE)
X 0.000
Y 0.000
Z 0.000
A 0.000
B 0.000
G00 G25
G97 G22
G67 G80
G99 G67
G21 G54
G40 G18 SCAT
PROGRAM O1234 N00010
O1234 ;
N10 G00 ;
N20 X100.;
N30 X200.;
N40 X300. Z300.;
N50 X400.;
N60 X500.;
N70 M02 ;
%
u_
Editing is enabled only for the program for the selected tool post. The
program for the first or second tool post can be edited on the same screen
by selecting either tool post with the tool post selection signal.
On the 9 CRT, the shared screen consists of 80 digits x 25 lines. If the
tool post name specified with parameter No. 3131 contains a character
other than alphanumeric and special characters (”# $ % & ’ () * + , – . /
: ; < = > ? @ [ ¥ ] ^ _ and space), the character ! will not be displayed
correctly. In such a case, operation soft keys
[SRH ° ] and [SRH ± ]
are displayed as [SRH +] and [SRH –].
This function cannot be used for background editing.
D Editing operation
D 9 CRT shared screen
Limitations

Leave a Reply

Your email address will not be published. Required fields are marked *