FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62754EN/01
672
Press function key
OFFSET
SETTING
to display or set tool compensation values and
other data.
This section describes how to display or set the following data:
1. Tool offset value
2. Settings
3. Run time and part count
4. Workpiece origin offset value or workpiece coordinate system shift
value
5. Custom macro common variables
6. Software operator’s panel
7. Tool life management data
This section also describes following functions.
D Direct input of tool offset value
D Direct input of tool offset value measured B
D Counter input of offset value
D Direct input of workpiece coordinate system shift
D Y axis offset
D Sequence number comparison and stop function
The following functions depend on the specifications of the machine tool
builder. See the manual issued by the machine tool builder for details.
D Direct input of tool offset value
D Direct input of tool offset value measured B
D Software operators panel
D Tool life management data
11.4
SCREENS DISPLAYED
BY FUNCTION KEY off
OFFSET
SETTING

Leave a Reply

Your email address will not be published. Required fields are marked *