FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
11. SETTING AND DISPLAYING DATA
681
The set coordinate system can be shifted when the coordinate system
which has been set by a G50 command (or G92 command for G code
system B or C) or automatic coordinate system setting is different from
the workpiece coordinate system assumed at programming.
Procedure for setting the workpiece coordinate system shifting amount
1 Press function key
OFFSET
SETTING
.
2 Press the continuous menu key
several times until the screen
with soft key
[WK.SHFT] is displayed.
> MZ100._ S 0 T0000
MDI **** *** *** 16:05:59
[ ][ WK.SHFT ][ ][ +INPUT ][ INPUT ]
(SHIFT VALUE) (MEASUREMENT)
X 0.000 X 0.000
Z 0.000 Z 0.000
WORK SHIFT O0001 N00000
ACTUAL POSITION (RELATIVE)
U 0.000 W 0.000
3 Press soft key [WK.SHFT].
4 Move the cursor using cursor keys to the axis along which the
coordinate system is to be shifted.
5 Enter the shift value and press soft key
[INPUT].
X
Z
O
Z’
X’
O’
Shift
11.4.5
Setting the Workpiece
Coordinate System
Shifting Amount

Leave a Reply

Your email address will not be published. Required fields are marked *