FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
11. SETTING AND DISPLAYING DATA
701
Setting and displaying B–axis tool compensation
1 Press the
OFFSET
SETTING
function key.
2 Press the
continuous menu key several times. Then, press the
[OFST.B] chapter selection key.
D When the option for tool geometry and wear compensation is
not provided,
OFFSET (B–AXIS) O0200 N00000
No. DATA
51 –999.999
52 –999.999
53 –999.999
54 –999.999
55 –999.999
56 –999.999
57 –999.999
58 –999.999
59 –999.999
>_ S 0 T0000
MDI **** *** *** 15:29:51
[ OFST.B ] [ ] [ ] [ ] [ ]
D When the option for tool geometry and wear compensation is
provided,
OFFSET (B–AXIS) O0200 N00000
NO. (WEAR) (GEOMETRY)
51 –999.999 –999.999
52 –999.999 –999.999
53 –999.999 –999.999
54 –999.999 –999.999
55 –999.999 –999.999
56 –999.999 –999.999
57 –999.999 –999.999
58 –999.999 –999.999
59 –999.999 –999.999
>_ S 0 T0000
MDI **** *** *** 15:29:51
[ OFST.B ] [ ] [ ] [ ] [ ]
4 Position the cursor to the item to be set or modified, using the cursor
keys.
11.4.15
Setting and Displaying
B–axis Tool
Compensation

Leave a Reply

Your email address will not be published. Required fields are marked *