FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
11. SETTING AND DISPLAYING DATA
B–62754EN/01
702
5 Enter the value, then press the
INPUT
key.
The offset can be set to a value in the following valid data ranges.
Offset Metric input Inch input
IS–B –999.999 to 999.999 –99.9999 to 99.9999
IS–C –999.9999 to 999.9999 –99.99999 to 99.9999
Special B–axis offsets are input or output together with usual offsets.
When the option for tool geometry and wear compensation is provided,
wear offsets and geometry offsets can be specified separately. A tool
offset consists of both the specified wear offset and geometry offset.
In two–path control, tool offsets can be specified for each tool post or both
tool posts, depending on the setting of COF, bit 0 of parameter No. 8242.
Explanations

Leave a Reply

Your email address will not be published. Required fields are marked *