FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

OPERATION
B–62754EN/01
13. HELP FUNCTION
723
2 Press soft key [1 ALAM] on the HELP (INITIAL MENU) screen to
display detailed information about an alarm currently being raised.
HELP (ALARM DETAIL) O0010 N00001
NUMBER : 027
M‘SAGE : NO AXES COMMANDED IN G43/G44
FUNCTION : TOOL LENGTH COMPENSATION C
ALARM :
IN TOOL LENGTH COMPENSATION TYPE C,
NO AXIS IS DESIGNATED IN G43 & G44
BLOCKS. IN TOOL LENGTH COMPENSATION
TYPE C, IT TRIES TO LATCH ON TO
ANOTHER AXIS WITHOUT OFFSET CANCE–
LING.
Normal explana–
tion on alarm
Fig.13(b) ALARM DETAIL Screen when P/S Alarm No.27 is issued
Function
classification
Alarm details
Alarm No.
>100 S 0 T0000
MEM **** *** *** 10:12:25
[ 1 ALM ][ 2 OPR ][ 3 PARA ][ ][ ]
Note that only details of the alarm identified at the top of the screen
are displayed on the screen.
If the alarms are all reset while the help screen is displayed, the alarm
displayed on the
ALARM DETAIL screen is deleted, indicating that no
alarm is issued.
HELP (ALARM DETAIL) O1234 N00001
NUMBER :
M‘SAGE :
FUNCTION :
ALARM :
<<ALARM IS NOT GENERATED>>
ENTER THE DETAIL–REQUIRED ALARM NUMBER,
AND PRESS [SELECT] KEY
Fig.13(c) ALARM DETAIL Screen when No Alarm is issued
>100 S 0 T0000
MEM **** *** *** 10:12:25
[ 1 ALM ][ 2 OPR ][ 3 PARA ][ ][ ]
ALARM DETAIL screen

Leave a Reply

Your email address will not be published. Required fields are marked *