FANUC Series 16/18/160/180-Model C for Lathe Operator Manual

INDEX
B–62754EN/01
i–1
Ơ
Numbers
ơ
14 color CRT/MDI (horizontal type), 429
14 color CRT/MDI (vertical type), 430
14 CRT and 9.5 LCD soft key configuration, 460
7.2 monochrome LCD (separate type), 432
8.4 color LCD (separate type), 432
8.4 color LCD/MDI (small type, sheet key), 426
8.4 color LCD/MDI (standard type, sheet key), 427
8–digit program number, 142
9.5 color LCD (separate type), 433
9.5 color LCD/MDI (horizontal type), 427
9.5 color LCD/MDI (vertical type), 428
9 monochrome CRT (separate type), 431
9 monochrome CRT/MDI (small type), 424
9 monochrome CRT/MDI (standard type), 424
9 monochrome PDP (separate type), 431
9 monochrome PDP/MDI (standard type), 425
Ơ
A
ơ
About this manual, 3
Absolute and incremental programming (G90, G91), 101
Actual feedrate display, 639
Adding workpiece coordinate systems (G54.1 or G54), 96
Address and specifiable value range for series 15 tape format, 329
Alarm, 502, 508, 533
Alarm and self–diagnosis functions, 548
Alarm detail screen, 723
Alarm display, 418, 549
Alarm history display, 551
Alarm list, 755
Alarm status, 710
Altering a word, 589
An alarm while a program is output, 564
Angular axis control / arbitrary axis control, 363
Arithmetic and logic operation, 285
Automatic erase CRT screen display, 714
Automatic inserting of sequence numbers, 613
Automatic operation, 409, 488
Automatic operation status, 709
Automatic tool offset (G36, G37), 267
Auxiliary function, 123
Auxiliary function (M function), 124
Axis control function, 343
Axis moving status/dwell status, 709
Ơ
B
ơ
B–axis control (G100, G101, G102, G103, G110), 353
Background editing, 608
Balance cut (G68, G69), 383
Block, 27
Branch and repetition, 290
Ơ
C
ơ
Calling a subprogram stored in an external input/output device, 491
Calling of subprogram, 124
Canceling spindle positioning, 115
Canned cycle, 332
Canned Cycle (G90, G92, G94), 146
Canned cycle cancel (G80), 182
Canned cycle for drilling (G80–G89), 173
Canned drilling cycle formats, 335
Canned grinding cycle (for grinding machine), 184
Chamfering and corner R, 188
Change from G23 to G22 in a forbidden area, 536
Change of modes, 473
Change of words or addresses, 605
Changing by G10, 92
Changing of tool offset value (programmable data input ) (G10), 266
Changing workpiece coordinate system, 92
Character–to–codes correspondence table, 754
Characters and codes to be used for the pattern data input function,
400
Check by running the machine, 411
Checked by self–diagnostic screen, 552
Checkpoint for the forbidden area, 536
Chuck and tailstock barriers, 538
Chuck barrier setting screen, 538
Circular interpolation (G02, G03), 45
Circular threading (G35, G36), 67
Clear, 507
Clearing the screen, 713
Collation, 561
Command for machine operations – miscellaneous function, 25
Compensation function, 201
Conditional branch (IF statement), 291
Conditions for making a tool post interference check, 378
Configuration of the help screen, 726
Constant lead threading (G32), 59
Constant surface speed control (G96, G97), 106
Continuous thread cutting, 64
Controlled axes, 31, 32
Conversational programming with graphic function, 618
Coordinate rotation (G68.1, G69.1), 270
Coordinate system, 87
Coordinate system on part drawing and coordinate system specified
by CNC – coordinate system, 17
Coordinate value and dimension, 100

Leave a Reply

Your email address will not be published. Required fields are marked *