FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
11. TOOL FUNCTION
(T FUNCTION)
B–62764EN/01
148
Suppose that the tool life management ignore number is 100.
T101; A tool whose life has not expired is selected from group 1.
(Suppose that tool number 010 is selected.)
M06T102;Tool life counting is performed for the tool in group 1.
(The life of tool number 010 is counted.)
A tool whose life has not expired is selected from group 2.
(Suppose that toolnumber 100 is selected.
M06T103;Tool life counting is lperformed for the tool in group 2.
(The life of tool number 100 is counted.)
A tool whose life has not expired is selected from group 3.
(Suppose that tool number 200 is selected.)
Suppose that the tool life management ignore number is 100.
T101M06;A tool whose life has not expired is selected from group 1.
(Suppose that tool number 010 is selected.)
Tool life counting is performed for the tool in group 1.
T102M06;A tool whose life has not expired is selected from group 2.
(Suppose that tool number 100 is selected.)
Tool life counting is performed for the tool in group 2.
(The life of tool number 100 is counted.)
D Tool change type B
and C
D Tool change type D

Leave a Reply

Your email address will not be published. Required fields are marked *