FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
B–62764EN/01
14. FUNCTIONS TO SIMPLIFY
PROGRAMMING
215
Z–axis feedrate 1000 mm/min
Spindle speed 1000 rpm
Thread lead 1.0 mm
<Programming for feed per minute>
G94 ; Specify a feed–per–minute command.
G00 X120.0 Y100.0 ; Positioning
M29 S1000 ; Rigid mode specification
G84 Z–100.0 R–20.0 F1000 ; Rigid tapping
<Programming for feed per revolution>
G95 ; Specify a feed–per–revolution command.
G00 X120.0 Y100.0 ; Positioning
M29 S1000 ; Rigid mode specification
G74 Z–100.0 R–20.0 F1.0 ; Rigid tapping


Leave a Reply

Your email address will not be published. Required fields are marked *