FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
B–62764EN/01
15. COMPENSATION FUNCTION
265
The programmed travel distance of the tool can be increased or decreased
by a specified tool offset value or by twice the offset value.
The tool offset function can also be applied to an additional
axis.
Programmed path
Tool center path
Tool
Workpiece
: Command for moving the tool
G45IP_D_ ;
Increase the travel distance by the tool offset value
Decrease the travel distance by the tool offset value
Increase the travel distance by twice the tool offset value
Decrease the travel distance by twice the tool offset value
D : Code for specifying the tool offset value
G45 to G48 : One–shot G code for increasing or decreasing the travel
distance
G46IP_D_ ;
G47IP_D_ ;
G48IP_D_ ;
IP
15.3
TOOL OFFSET
(G45–G48)
Format

Leave a Reply

Your email address will not be published. Required fields are marked *