FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

15. COMPENSATION FUNCTION
B–62764EN/01
PROGRAMMING
336
(b)For specification made other than immediately after automatic
reference position return
When CCN (bit 2 of parameter No.5003)=0
O××××;
G91G41_ _ _;
G29X40.Y40.;
[Type A]
G29
[Type B]
(G42G01)
G01
s
s
r
s
s
ss
r
(G42G01)
r
r
G01
Return position
Intermediate
position
G29
Intermediate
position
Return position
Start–up
Start–up
When CCN (bit 2 of parameter No.5003)=1
G29
[FS15 Type]
(G42G01)
G01s
s
s
Intermediate
position
Return position
(2)G29 specified in offset mode (with movement to an intermediate
position not performed)
(a) For specification made immediately after automatic reference
position return
When CCN (bit 2 of parameter No.5003)=0
O××××;
G91G41_ _ _;
G28X40.Y–40.;
G29X40.Y40.;
[Type A]
(G42G01)
G29
[Type B]
s
(G42G01)
s
G28/30/30.1
r
s
r
s
G28/30/30.1
s
G29
s
r
G01
G01
Reference position or floating
reference position=Intermedi-
ate position
Return position
Return position
Reference position or floating
reference position=Intermedi-
ate position

Leave a Reply

Your email address will not be published. Required fields are marked *