16. CUSTOM MACRO
By setting an M code number used to call a subprogram (macro program)
in a parameter, the macro program can be called in the same way as with
a subprogram call (M98).
Parameter No.6071 = 03
By setting an M code number from 1 to 99999999 used to call a
subprogram in a parameter (No.6071 toNo. 6079), the corresponding
custom macro program (O9001 to O9009) can be called in the same way
as with M98.
Program number Parameter number
As with a simple call, a number of repetitions from 1 to 9999 can be
specified at address L.
Argument specification is not allowed.
An M code in a macro program that has been called is treated as an
ordinary M code.
In a macro called with a G code or in a program called with an M or T code,
no subprograms can be called using an M code. An M code in such a
macro or program is treated as an ordinary M code.
Using an M Code
numbers and program
D Argument specification
D M code