FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
17. PATTERN DATA INPUT
FUNCTION
B–62764EN/01
424
Pressing the
OFFSET
SETTING
key and [MENU] is displayed on the following
pattern menu screen.
1. TAPPING
2. DRILLING
3. BORING
4. POCKET
5. BOLT HOLE
6. LINE ANGLE
7. GRID
8. PECK
9. TEST PATRN
10. BACK
MENU : HOLE PATTERN O0000 N00000
> _
MDI **** *** *** 16:05:59
[ MACRO ] [ MENU ] [ OPR ] [ ] [(OPRT)]
HOLE PATTERN : This is the menu title. An arbitrary character string
consisting of up to 12 characters can be specified.
BOLT HOLE : This is the pattern name. An arbitrary character
string consisting of up to 10 characters can be
specified, including katakana.
The machine tool builder should specify the character strings for the menu
title and pattern name using the custom macro, and load the character
strings into program memory as a subprogram of program No. 9500.
17.1
DISPLAYING THE
PATTERN MENU

Leave a Reply

Your email address will not be published. Required fields are marked *