17. PATTERN DATA INPUT
When a pattern menu is selected, the necessary pattern data is
NO. NAME DATA COMMENT
501STANDARD X 0.000 *BOLT HOLE
502STANDARD Y 0.000 CIRCLE*
503RADIUS 0.000 SET PATTERN
504S. ANGL 0.000 DATA TO VAR.
505HOLES NO0.000 NO.500–505.
ACTUAL POSITION (RELATIVE)
X 0.000 Y 0.000
VAR. : BOLT HOLE O0001 N00000
MDI **** *** *** 16:05:59
[ MACRO ] [ MENU ] [ OPR ] [ ] [(OPRT)]
BOLT HOLE : This is the pattern data title. A character string
consisting of up to 12 characters can be set.
TOOL : This is the variable name. A character string
consisting of up to 10 characters can be set.
BOLT HOLE CIRCLE* :
This is a comment statement. A character string
can be displayed consisting of up to 8 lines, 12
characters per line.
(It is permissible to use katakana
in a character string or line.)
The machine tool builder should program the character strings of pattern
data title, pattern name, and variable name using the custom macro, and
load them into the program memory as a subprogram whose No. is 9500
plus the pattern No. (O9501 to O9510).