FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
B–62764EN/01
22. TWO–PATH CONTROL
FUNCTION
489
A machine with two paths have different custom macro common
variables and tool compensation memory areas for path 1 and 2. Paths 1
and 2 can share the custom macro common variables and tool
compensation memory areas provided certain parameters are specified
accordingly.
Paths 1 and 2 can share all or part of custom macro common variables
#100 to #149 and #500 to #531, provided parameters 6036 and 6037 are
specified accordingly. (The data for the shared variables can be written
or read from either path.) See Section 16.1 of Part II.
Path 2 can reference or specify the data in the tool compensation memory
area of path 1, provided the CMF bit (bit 5 of parameter 8100) is specified
accordingly. This can be executed only when paths 1 and 2 have identical
data for tool compensation (number of groups, number of columns, unit
system, etc.).
22.3
MEMORY COMMON
TO PATH
Explanations
D Custom macro common
variables
D Tool compensation
memory

Leave a Reply

Your email address will not be published. Required fields are marked *