FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
2. OPERATIONAL DEVICES
B–62764EN/01
510
The following Setting and Display units are avairable.
2.1.1 9 Monochrome CRT/MDI (Small Type)
2.1.2 9 Monochrome CRT/MDI (Standard Type)
2.1.3 9 Monochrome PDP/MDI (Standard Type)
2.1.4 8.4 Color LCD/MDI (Small Type, Sheet Key)
2.1.5 8.4 Color LCD/MDI (Standard Type, Sheet Key)
2.1.6 9.5 Color LCD/MDI (Horizontal Type)
2.1.7 9.5 Color LCD/MDI (Vertical Type)
2.1.8 14 Color CRT/MDI (Horizontal Type)
2.1.9 14 Color CRT/MDI (Vertical Type)
2.1.10 9 Monochrome CRT (Separate Type)
2.1.11 9 Monochrome PDP (Separate Type)
2.1.12 7.2 Monochrome LCD (Separate type)
2.1.13 8.4 Color LCD (Separate type)
2.1.14 9.5 Color LCD (Separate Type)
2.1.15 Separate Type MDI (Small Key) for 9CRT/PDP, 8.4/7.2LCD
2.1.16 Separate Type MDI (Standard Key) for 9CRT/PDP,
8.4/7.2LCD
2.1.17 Separate Type MDI (Vertical Type) for 9.5LCD
2.1.18 Separate Type MDI (Horizontal Type) for 9.5LCD
2.1
SETTING AND
DISPLAY UNITS

Leave a Reply

Your email address will not be published. Required fields are marked *