FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
B–62764EN/01
2. OPERATIONAL DEVICES
545
There are 12 soft keys in the 14CRT/MDI or 9.5LCD/MDI. As
illustrated below, the 5 soft keys on the right and those on the right and
left edges operate in the same way as the 9CRT or 8.4 LCD, whereas
the 5 keys on the left hand side are expansion keys dedicated to the
14CRT or 9.5LCD.
9CRT/8.4 LCD soft key
14CRT/9.5LCD dedicated expansion soft keys
Fig. 2.3.6(a) CRT and LCD soft key configuration
14CRT/9.5LCD soft key
Whenever a position display appears in the left half of the screen after a
function key other than
POS
is pressed, the soft keys on the left half of
the soft key display area are displayed as follows:
ABS
REL ALL
HNDL
The soft key corresponding to the position display is indicated in reverse
video.
2.3.6
14CRT and 9.5LCD
Soft Key Configuration

Leave a Reply

Your email address will not be published. Required fields are marked *