FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

PROGRAMMING
B–62764EN/01
3. PREPARATORY FUNCTION
(G FUNCTION)
37
Table 3 G code list (3/3)
G code
Group Function
G65 00 Macro call
G66
12
Macro modal call
G67
12
Macro modal call cancel
G68
16
Coordinate rotation
G69
16
Coordinate rotation cancel
G73
09
Peck drilling cycle
G74
09
Counter tapping cycle
G75 01 Plunge grinding cycle (for grinding machine)
G76
09
Fine boring cycle
G77 Direct constant–dimension plunge grinding cycle(for grinding machine)
G78 01 Continuous–feed surface grinding cycle(for grinding machine)
G79 Intermittent–feed surface grinding cycle(for grinding machine)
G80
Canned cycle cancel/external operation function cancel
G81
Drilling cycle, spot boring cycle or external operation function
G82 Drilling cycle or counter boring cycle
G83 Peck drilling cycle
G84
09
Tapping cycle
G85 Boring cycle
G86 Boring cycle
G87 Back boring cycle
G88 Boring cycle
G89 Boring cycle
G90
03
Absolute command
G91
03
Increment command
G92
00
Setting for work coordinate system or clamp at maximum spindle speed
G92.1
00
Workpiece coordinate system preset
G94
05
Feed per minute
G95
05
Feed per rotation
G96
13
Constant surface speed control
G97
13
Constant surface speed control cancel
G98
10
Return to initial point in canned cycle
G99
10
Return to R point in canned cycle
G160
20
In–feed control function cancel(for grinding machine)
G161
20
In–feed control function(for grinding machine)

Leave a Reply

Your email address will not be published. Required fields are marked *