FANUC Series 16/18/160/180-Model C Machining Center Operators Manual

OPERATION
4. AUTOMATIC OPERATION
B–62764EN/01
604
Procedure for Scheduling Function
1 Press the MEMORY switch on the machine operators panel, then
press the
PROG
function key on the MDI panel.
2 Press the rightmost soft key (continuous menu key), then press the
[FL. SDL] soft key. A list of files registered in the Floppy Cassette is
displayed on screen No. 1. To display more files that are not
displayed on this screen, press the page key on the MDI panel. Files
registered in the Floppy Cassette can also be displayed successively.
FILE DIRECTORY O0001 N00000
MEM
**** *** ***
19 : 14 : 47
PRGRM
(OPRT)
CURRENT SELECTED : SCHEDULE
NO. FILE NAME (METER) VOL
0000 SCHEDULE
0001 PARAMETER 58.5
0002 ALL PROGRAM 11.0
0003 O0001 1.9
0004 O0002 1.9
0005 O0010 1.9
0006 O0020 1.9
0007 O0040 1.9
0008 O0050 1.9
SCHDUL
Screen No.1
DIR
3 Press the [(OPRT)] and [SELECT] soft keys to display “SELECT
FILE NO.” (on screen No. 2). Enter a file number, then press the
[F
SET]
and [EXEC] soft keys. The file for the entered file number is
selected, and the file name is indicated after “
CURRENT
SELECTED:
”.
O0001 N00000
MEM
**** *** ***
19 : 17 : 10
FILE DIRECTORY
CURRENT SELECTED:O0040
NO. FILE NAME (METER) VOL
0000 SCHEDULE
0001 PARAMETER 58.5
0002 ALL PROGRAM 11.0
0003 O0001 1.9
0004 O0002 1.9
0005 O0010 1.9
0006 O0020 1.9
0007 O0040 1.9
0008 O0050 1.9
SELECT FILE NO.=7
F SET
EXEC
Screen No.2
>_
Procedure
D Procedure for executing
one file

Leave a Reply

Your email address will not be published. Required fields are marked *